來源：http://www.genesisfiberoptic.com/ 發布時間：2022-03-04 瀏覽次數：
Laser welding machine has become a new industrial technology in the process of industrial welding because of its advantages of fast welding speed, high precision, high efficiency and smooth and beautiful weld. Laser welding machine has been widely used, but many people do not know what materials laser welding machine can weld.
1. Die steel
Laser welding machine can be used for welding various die steels with good welding effect.
2. Carbon steel
Steel is welded by laser welding machine, and the welding quality depends on the impurity content. In order to obtain good welding quality, preheating is required when the carbon content exceeds 0.25%. When steels with different carbon contents are welded together, the welding gun can be slightly tilted to the side of low-carbon material to ensure the quality of the joint. Because the heating speed and cooling speed of laser welding machine are very fast, when welding carbon steel. With the increase of carbon content, the sensitivity of welding crack and notch also increases. Medium and high carbon steel and ordinary alloy steel can be welded by laser, but preheating and post weld treatment are required to solve the stress and avoid cracks.
3. Alloy steel
As long as appropriate welding parameters are selected, the joints with mechanical properties of base metal can be obtained by laser welding of low alloy steel and high strength steel.
4. Stainless steel
Generally speaking, stainless steel welding is easier to obtain high-quality welded joints than conventional welding. Due to the high welding speed and small heat affected zone of laser welding, the adverse effects of overheating and linear expansion coefficient on stainless steel welding are reduced, and there are no defects such as pores and inclusions. Compared with carbon steel, stainless steel has low thermal conductivity, high absorption and melting efficiency, and it is easier to obtain deep penetration welding. Through the manufacturer of low-power laser welding machine, the joint with good appearance, smooth weld and beautiful appearance can be obtained.
5. Copper and copper alloys
The welding of copper and copper alloy is easy to cause penetration problems, so centralized high-power heat source and preheating measures should be adopted; When the thickness of the workpiece is thin or the structural stiffness is small, and there are no measures to prevent deformation, it is easy to produce large deformation after welding, but when the welded joint is subject to large rigid constraints, it is easy to produce welding stress; Copper and copper alloys are also prone to thermal cracks during welding. Porosity is one of the common defects in copper and copper alloy welding.
6. Aluminum and aluminum alloys
Aluminum and aluminum alloys are highly reflective materials. With the increase of temperature, the solubility of hydrogen in aluminum increases sharply. Dissolved hydrogen becomes the defect source of the weld. There are many pores in the weld, but there may be cavities at the root of deep penetration welding and poor weld formation.
Laser welding machine materials far exceed these materials. Laser welding can be carried out between different metals by manufacturers. The results show that under certain conditions, laser welding manufacturers can carry out between copper nickel, nickel titanium, copper titanium, titanium molybdenum, brass, low carbon steel copper and other different metals.